roller bearing

Outer ring for FBX brand drawn cup needle roller bearing is fine pressed with steel strip, bearing with this kind of structure possesses small space, and has higher loading capacity. They are suitable for applications with limited space and housing is not hard enough to act as raceway. The shaft surface can be used as the raceway while hardened and ground. No requirement on axial location when the bearing is pressed into the housing.
Generally this kind of drawn cup needle roller bearing isnt necessary to be assembled together with inner ring. If its a must, the inner ring can be selected from this catalogue. If the specified inner ring cant be found in this catalogue, please contact with the technical department from FBX.
Comparing with the drawn cup needle roller bearing with both open ends, drawn cup needle bearing with one open end and another close end is very efficiency for the shaft end to be sealed. As there is grease (Lithium base grease) sealed in the bearing, it can be continuously rotated within temperature range -20 to +120, and within temperature up to +130 for a short time or greased with extra grease. Welcome to our website to read more information on this product Bearing Strip