Features of flanged bearing
Page 1 of 1
Features of flanged bearing
Flanged bearing is a type of bearing. A bearing is a device to allow constrained relative motion between two or more parts, typically rotation or linear movement. Bearings may be classified broadly according to the motions they allow and their principle of operation as well as by the directions of applied loads they can handle. Flanged bearings are available open, shielded or sealed with bore sizes as small as 1mm. The smaller sizes are sometimes referred to as instrument bearings.
Flanged bearings are available in SAE52100 chrome steel and AISI440C or KS440 (ACD34/X65Cr13) stainless steel, these metric sized deep groove radial flanged bearings can withstand heavy radial loads and moderate thrust loads in both directions. Flanged bearings have an outer ring flange to facilitate location in a housing.
Many of these flanged bearings can be supplied to order with ceramic balls (hybrid bearings). Most sizes are available in stainless steel or passivated stainless steel for more corrosive environments. And flange ball bearing can be supplied double flanged.
Flanged bearings are bearings with a flange on the out ring simplify axial location. The housing for such bearings can consist of a through-hole of uniform diameter, but the entry face of the housing (which may be either the outer or inner face) must be machined truly normal to the hole axis.
Flanged bearings are available in SAE52100 chrome steel and AISI440C or KS440 (ACD34/X65Cr13) stainless steel, these metric sized deep groove radial flanged bearings can withstand heavy radial loads and moderate thrust loads in both directions. Flanged bearings have an outer ring flange to facilitate location in a housing.
Many of these flanged bearings can be supplied to order with ceramic balls (hybrid bearings). Most sizes are available in stainless steel or passivated stainless steel for more corrosive environments. And flange ball bearing can be supplied double flanged.
Flanged bearings are bearings with a flange on the out ring simplify axial location. The housing for such bearings can consist of a through-hole of uniform diameter, but the entry face of the housing (which may be either the outer or inner face) must be machined truly normal to the hole axis.
oscar0912- Posts : 7
Join date : 2011-09-17
Similar topics
» Features of flanged bearings
» What is flanged washer spring?
» Flanged ball bearings information
» Wafer flanged ball valve
» Flanged angle seat valve
» What is flanged washer spring?
» Flanged ball bearings information
» Wafer flanged ball valve
» Flanged angle seat valve
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|